Announcement

Collapse
No announcement yet.

Need measurement for tranny

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need measurement for tranny

    I need the measurement on a cj with a model 300 transfercase.

    what is the measurement to the center of the rear driveshaft ?

    mine is 26" inside width of frame and it is at about 11" from drivers side.
    I am trying to see if it should be directly centerd or if it is off set a few inchs.

    thank you.
    Shawn

  • #2
    All the trannies i know measure at least 5'10" or taller... most with a size 12 heel as well.... wanna see some pics?

    hahahhah, sorry shawn, but the thread title made me giggle...

    I have no tech to offer, i'm retarded.


    Comment


    • #3
      Yes I guess I should of used the full name off what I am looking for. But I am
      just falling into the lazy ass typing ebonics.

      Shawn

      Comment


      • #4
        I do have a dana300 if you need one...


        Comment


        • #5
          Originally posted by carwash View Post
          All the trannies i know measure at least 5'10" or taller... most with a size 12 heel as well.... wanna see some pics?

          hahahhah, sorry shawn, but the thread title made me giggle...

          I have no tech to offer, i'm retarded.

          You just love to get your high heels out don't you........


          if i am not currently offending you, i will be shortly.

          Comment


          • #6
            only when i know yer coming down to the house... special occasions only.


            Comment


            • #7
              Originally posted by carwash View Post
              only when i know yer coming down to the house... special occasions only.

              You have to pay for your parts somehow...........;)


              if i am not currently offending you, i will be shortly.

              Comment


              • #8
                back on track...

                I have a cj with a 258, chrysler auto transmission, and dana 300. At the output of the transfer case, I measure 32" inside the frame rails. From driver side inside frame is 15" and from passenger side inside frame is 17". It's offset just a bit to match the amc 20 rear axle. Hope this helps.

                BiggDaddy
                '82 CJ-7, 6" lift, stock axles
                258, 35x15.50x15 TSL/SX
                Rustoleum Gray

                Comment

                Working...
                X