35's

[dan]

how bad would 35's be on a four bananger trying to decide on what tire size I want 35's but think the four banger would crap out or the ax5 would

[carwash]

with stock gears, yes it will bring the suck.

[JET455]

you will need 4.88's to make it worth it.

[JET455]

By the way I have some 35's here I need to move did you ever get your blower/heat working?

[Bear Chow]

That ax5 will go long before the 4cyl. If you do the gears you'll be fine, stock is miserable. And you have to worry about the rear axle if it's a 35C.

[dan]

what kind of 35's, yea i got the heat working it was a twenty dollar switch

[94Dodge Truggy]

with stock axles? (35 & 30)

[94Dodge Truggy]

With stock axles and 4.88's I would find a light weight 33 that is not too wide. If you really want 35's try the super swamper tsl bias ply tires in a narrow width or the irocs.

[dan]

if i go 35's going to get a set of 44s, actually i need to do that any way so i'm in the market if anybody has some

[94Dodge Truggy]

I have a dana 44 with 4.56 ratio from a 1995 dodge ram. It comes with coil springs, steering linkage, steering box, steering pump, steering shaft, track bar, and 2 sets of extra inner axle shafts for the left and right side. 250.00

[dan]

where are u located and my next day off isn't until tuesday would i be able to check them out then

[94Dodge Truggy]

I may be able to do that. Let me see how this weekend goes.

[dan]

just let me know

[dan]

anybody know where to find some spring perches for a tj

[sarge]

http://www.ruffstuffspecialties.com/...83a9b87168749c

there you go !!!