Announcement

Collapse
No announcement yet.

Truggy Build 3.0

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    hey Kevin. when you order tubing let me know. I will order some as well with you so we can get a better discount. I get a Military discount at Ackerman as well.
    sigpic

    Keep them on all 4's

    Comment


    • #17
      Originally posted by 94Dodge Truggy View Post
      The front cover area is different in design and just the front case cover can be bought for 110.00 separately. Crossing my fingers.
      I have a Rubicon case that came out of my 05 LJ. Both halves of the case around the front output are cracked due to my front driveshaft ejecting at highway speed. The rest of its fine. I kept it for spare parts but sold the LJ. You are welcome to it if you think there is anything you can use off of it.
      Ian

      06 Toyota 4Runner

      Comment


      • #18
        Originally posted by Drivermod View Post
        I have a Rubicon case that came out of my 05 LJ. Both halves of the case around the front output are cracked due to my front driveshaft ejecting at highway speed. The rest of its fine. I kept it for spare parts but sold the LJ. You are welcome to it if you think there is anything you can use off of it.
        That's a deal! It will at least be good for parts. Will you be at the next meeting?
        sigpic

        Comment


        • #19
          Originally posted by 94Dodge Truggy View Post
          Will you be at the next meeting?
          (FYI, no December meeting, next isn't until January 11th...)
          DIRTY DEEDS, DONE DIRT CHEAP
          Whatever doesn't kill you makes you stranger

          Comment


          • #20
            Originally posted by 94Dodge Truggy View Post
            That's a deal! It will at least be good for parts. Will you be at the next meeting?
            Probably not. Raising 7 kids I don't have much time for club stuff. I live in Union. Give me a call if you want to come get it. (859)786-9785
            Ian

            06 Toyota 4Runner

            Comment


            • #21
              Mocking up suspension and links. 86" wide x 126" wheelbase. Machined a custom overdrive power steering pulley. Hit the mark!
              Attached Files
              sigpic

              Comment


              • #22
                looking good!
                sigpic

                Keep them on all 4's

                Comment


                • #23
                  Originally posted by 94Dodge Truggy View Post
                  Mocking up suspension and links. 86" wide x 126" wheelbase. Machined a custom overdrive power steering pulley. Hit the mark!
                  This thing is going to be awesome!

                  Comment


                  • #24
                    Stopped by today and it is really looking good!
                    sigpic

                    Keep them on all 4's

                    Comment


                    • #25
                      Suspension is tacked in and front bumper is being built.
                      Attached Files
                      sigpic

                      Comment


                      • #26
                        Hurry up !! The prime time to play is getting near !!
                        No need for a Winch...You just have to make it !!

                        Comment


                        • #27
                          Moved 1 foot forward and 1 foot backward for the 1st time in 4 months. Few things have changed while in the process of building. Went with coilovers all the way around and did not cut as much off of the lower doors as I was planning on doing. Going to weigh the vehicle next week. Only a few major things that are keeping it off the trails currently. Front driveshaft needs to be lengthened 1.9", finish welding in the links points, add bed skins,
                          recovery gear, spare tire etc...
                          Attached Files
                          sigpic

                          Comment


                          • #28
                            Looking at where I thought the build would go on my 1st page of this thread.

                            My 5000 lb. goal will be tough to keep.
                            Ran Fox 2.0's all the way around.
                            PSC full hydro with modded stock pump and custom pulley.
                            4 link with track bar up front but dual triangulated rear.
                            Exo-caged.
                            12000 lb winch
                            1410 rear driveshaft
                            Last edited by 94Dodge Truggy; 04-05-2018, 04:04 PM.
                            sigpic

                            Comment


                            • #29
                              Ahhhh so nice to see another full-size rig out on the trails with us! Can't wait to see how it does. Looks very good!!

                              Comment


                              • #30
                                Gonna make Rush this weekend?


                                Sent from my iPhone using Tapatalk
                                sigpic

                                Keep them on all 4's

                                Comment

                                Working...
                                X