3/16th plate steel
 

anyone need any , I got a deal ( I think ) on 4'x8'+ sheets if there is enough interest I may get a bunch. I'm going to pick some up on Monday , if it is good quality , as in rust and twist free I'll post up prices.

I'd be down for one sheet once you get an idea of price... any chance for 1/8"?

How about Aluminium sheet?

Jeff

I could use 1 as well

Depending on the price, I might...

Thanks!

Robert

I would be in for a sheet of 3/16" (or even 7ga.) may be up for 1/8" sheet as well. Let us know what price you can get.

can only get the 3/16 , I talked to my guy today and they will be out of the shop until midweek so I will be waiting on him to call me . I will let everyone know as soon as I get the first load. Looks like it's going to run about $100.00 for a full 4'x8' sheet. just a ball park guess , I will confirm when I pick mine up.

I assume it's A36 plate and should be about 250lbs. per 4x8 sheet for 3/16". Have to figure how manny strong backs needed to load a sheet in the truck!

sarge, count me in....

i may be interested in a sheet depending on price...thanks

I might be in too,, :)

Sorry gonna have to back out... After my truck dying today i need all the cash i got right now... If it ends up i can do it i'll let you know....
Thanks
Chris

I could use the other half if you wanted to cut a sheet in half

Got any pics? :D :D :D :D

it looks like this from the side:)



_______________________________________________

Are you sure thats 3/16"? Looks a little thin.

:p

is that better?



________________________________________

that doens't look quite like 8'... or 4' for that matter.

Didn't you see Willy Wonka? When you transmit stuff over the innerweb, it comes out smaller on the other side.

Do I have to explain everything to you people?

Robert

looks good...:eek:
:beers:

I'm only going to be able to get about 6 sheets , it is straight , twist and rust free new plate and is 245 lbs.

I will be getting it next week I hope ! I will let everyone know when I get it . I will be bringing it to my house and putting it in the garage to keep it out of the weather . I will not deliver ! the **** is just too heavy to be loading and unloading ...... the cost is $95 a sheet . I have a plasma cutter and can cut a sheet in half if needed for cardboard box with frosty adult beverages inside. :beers:

If your in, and want a sheet post up , I will go in order of post.

Sarge

Half sheet

What Brand:beers:

I'm a cheap bastard so, Natty light :D

on 2nd thought i'll take a whole sheet if available, but can you cut it in half?
My plasma has not made it home yet... :(

I will take 1/2 a sheet

I will take half sheet

I'll take a whole uncut sheet.. let me know if you need money before you get the sheets in your possession.

I can tell you that getting money up front is a good idea.. When I was pimping the 1/4" plate I had 20 people "commit" to wanting full and half sheets and when it came time to collect I was left holding the bag. It ended up taking 3 months of re-pimping to clear my garage of 6,000 lbs. of steel

Jeff