|
Were you blowing out spark plugs? I had a 99 v-10 that loved to do that. I ended up tapping the head out to accept a 13mm spark plug and machined a steel bushing with a bevel to seal and tapped on the inside to accept a stock plug and JB welded the bushing into the head. Spent a lot of time talking to JB weld engineers and the guaranteed me it would hold up to the heat and it did. Never had an issue. Had to do this to about 4 plugs.
__________________
91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.
|