C.O.R.E. FORUM - View Single Post - 4-link build

buckeyezuk · 05-16-2011, 03:05 PM

just by looking at the pics, to me it looks like you need to move the top of the shocks in. you might be able to make it work by going to extremes with wheel spacers and backspacing, but moving the shocks in should be a minor adjustment... Have you checked for side to side movement between truck and axle. looks like there isnt much triangulation in the 4 link? other than that, the fab work looks nice to me.

05-16-2011, 03:05 PM	#4
buckeyezuk wheeler Join Date: Feb 2008 Location: bethel Posts: 134	4 link just by looking at the pics, to me it looks like you need to move the top of the shocks in. you might be able to make it work by going to extremes with wheel spacers and backspacing, but moving the shocks in should be a minor adjustment... Have you checked for side to side movement between truck and axle. looks like there isnt much triangulation in the 4 link? other than that, the fab work looks nice to me. __________________ ZUKI linked f/r 16v air shocks cut 39.5" tsl. exod. full hydro F/R. rear steer.