Jeep shop for re-gearing? recommendations?

[Runoveru2]

Originally Posted by 93 Krawler

I did the same thing. I've done more than I can remember now.

Been setting up rearends from a lawnmower to 5 ton toploader rearends & power dividers for about the last 18 years, along with rebuilding 8-18 speed transmissions. I don't always have alot of time on my hands to do em but if you are not in a major rush get a hold of me and if ya wanna drop it off I will do it as quick as I can. I charge very reasonable and have never had anyone complain. Will setup specifically for offroad or on road.

[bbtank45]

Originally Posted by Runoveru2

Been setting up rearends from a lawnmower to 5 ton toploader rearends & power dividers for about the last 18 years, along with rebuilding 8-18 speed transmissions. I don't always have alot of time on my hands to do em but if you are not in a major rush get a hold of me and if ya wanna drop it off I will do it as quick as I can. I charge very reasonable and have never had anyone complain. Will setup specifically for offroad or on road.

^^^OP. I can speak from first hand experience, this IS your best and most cost effective option. Jim taught me the basics and i've since been setting up gears myself.

[93 Krawler]

Originally Posted by bbtank45

^^^OP. I can speak from first hand experience, this IS your best and most cost effective option. Jim taught me the basics and i've since been setting up gears myself.

Is your your junk almost ready for the wheeling season?

End hijack...

[Runoveru2]

Originally Posted by 93 Krawler

Is your your junk almost ready for the wheeling season?

End hijack...

No doubt, you gonna be ready ?

[bbtank45]

I wish i had some better pictures...

I have the majority of the parts on hand, just need to get busy. Ive had some delays in my build schedule relating to my daily drivers....o and i was in the Carribean on a family cruise for a bit too

I have the motor (sending harness & ECM to Jims performance next week), trans, all hydro steering components, everything for the front 3 link.

Still need to find: aluminum radiator and fan, gauges, CO's......time!!!

Wheeling this year is a personal priority....im going to make it happen. Billy has his rig ready to rock; he should be finished with his new gauges this week.

Ill keep you posted.

[93 Krawler]

Originally Posted by bbtank45

I wish i had some better pictures...

I have the majority of the parts on hand, just need to get busy. Ive had some delays in my build schedule relating to my daily drivers....o and i was in the Carribean on a family cruise for a bit too

I have the motor (sending harness & ECM to Jims performance next week), trans, all hydro steering components, everything for the front 3 link.

Still need to find: aluminum radiator and fan, gauges, CO's......time!!!

Wheeling this year is a personal priority....im going to make it happen. Billy has his rig ready to rock; he should be finished with his new gauges this week.

Ill keep you posted.

Well hurry up.