95 S-10 Truggy Build

93 Krawler · 09-05-2019, 10:36 AM

Here is the almost finished product. I still have to make tube doors, install lights, and a skid plate.

Click image for larger version

Name: 20190828_201905.jpg
Views: 6620
Size: 124.2 KB
ID: 10409

Click image for larger version

Name: 20190828_202034.jpg
Views: 6717
Size: 130.0 KB
ID: 10410

Click image for larger version

Name: 20190828_201932.jpg
Views: 6722
Size: 149.8 KB
ID: 10411

93 Krawler · 09-05-2019, 11:05 AM

Tried the new rig out at Slade. It did great and no major issues. I made a mistake in thinking all pcm's will utilize the 4 low shift tables. Just because they are showing in the tune, doesn't mean the pcm reads them. So when I switched rigs, I did away with the drive by wire and went to drive by cable. My old pcm would not work, so I used one from a 2003 Express van. After spending $100 on HP tuners credits, I found out that it wouldn't shift in low range. So now I have to find a 4x4 pcm that had drive by cable and spend another $100 in credits. Live and learn I guess...

Didn't take long to knock the new off of it.

Click image for larger version

Name: 20190831_133312.jpg
Views: 6679
Size: 195.8 KB
ID: 10412

Name: 76316.jpeg
Views: 6827
Size: 135.4 KB

Click image for larger version

Name: 76321.jpg
Views: 6675
Size: 94.8 KB
ID: 10414

bbtank45 · 09-05-2019, 03:27 PM

Looks great Kevin! Any idea what she weighs?

93 Krawler · 09-09-2019, 02:39 PM

Quote:

Originally Posted by bbtank45

Looks great Kevin! Any idea what she weighs?

Thanks. No, still have a few things to add before I get it weighed.

Sent from my S7 using Tapatalk

09-05-2019, 03:27 PM	#3
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Looks great Kevin! Any idea what she weighs? __________________ 1985 4runner "Redneck Gigalo"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-05-2019, 10:36 AM	#1
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Here is the almost finished product. I still have to make tube doors, install lights, and a skid plate.

09-05-2019, 11:05 AM	#2
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Tried the new rig out at Slade. It did great and no major issues. I made a mistake in thinking all pcm's will utilize the 4 low shift tables. Just because they are showing in the tune, doesn't mean the pcm reads them. So when I switched rigs, I did away with the drive by wire and went to drive by cable. My old pcm would not work, so I used one from a 2003 Express van. After spending $100 on HP tuners credits, I found out that it wouldn't shift in low range. So now I have to find a 4x4 pcm that had drive by cable and spend another $100 in credits. Live and learn I guess... Didn't take long to knock the new off of it.