My Cj7 Build Buckminster - Page 4

jwend · 07-04-2011, 12:28 AM

1 more

yellowjacket · 07-04-2011, 09:00 AM

Looks nice. I forgot u only had assist before. Ur gonna be lovin that full hydo.
Hey where does the buckminster name come from?

jwend · 07-04-2011, 11:12 AM

he is the little weasle on ice age 2.. my girls little boy named it..

jwend · 07-06-2011, 08:23 PM

The final parts order has been placed!! shipped today here friday.... GOAL is trailer it home sunday night!

mckeddie · 07-11-2011, 10:23 PM

your going to want a sway bar with those shocks on the front. looks good. can't wait to see this thing in person eventually.

jwend · 07-31-2011, 03:42 PM

this thig is going to be for sale or for trade when it is finished.. and that will be soon.. just a heads up I will trade for money a RZR or streetable jeep.. but it will take a little of all three or alot of one... going to be asking 27,000 for it.. i am very negotiable and it will come with a brand new car trailer... If you think i am asking too much i really dont want to hear yer opinion either.. i know what mine is and what is out there.. 90% of it is $hit, mine is right.

It is built,

Dana 60 front with spartan locker yukon cromos and Rpm slugs high steer arms with btf truss and full hydro with derail fan cooled cooler, linked with 8 1 1/4 hiems 2inch upper and lowers all set up by ruff stuff tabs and brackets 16 in fox airs 4.10

14 bolt rear with btf truss Overson mini spool, ruff stuff caliper brackets and 85 chev calipersLinked with all Johnny joints. 2 1/2 lowers 2 inch uppers to Gen right 4 link frame mount. 18 in fox airs 4.10

Tom Woods custom shafts

np205 transfer

th400 with a art car winters gate shifter with derail fan cooled cooler

05 70k mile chevy 5.3 with new jegs radiator shroud and fan

corvette master cylinder brake set up

CW built front bumper stinger and winch mount

Rear half of frame cut off and custom frame and bumper installed

Full roll cage tied to frame with seats tied to cage 3 prp high back comp seats and a preme seat for a kid, all with 5 point harnesses

It will come with a cb radio and wake board speakers

the dash has all auto meter gauges oil pressure water temp, fuel level, volts and fuel pressure. 12 fused switches.

The list on this thing goes on and on and on.. there was no cost spared in building this thing all high end parts and done right I love this thing and it pains me to sell it but I have things that are more important to take care of at this point. This is the only post for now but when its finished it will be posted on pirate and everywhere else..

George · 07-31-2011, 05:07 PM

your not going to to Bill are you lol

yellowjacket · 07-31-2011, 05:16 PM

Id offer my buggy and $20k but sounds like ur gettin out of the sport:confused:.

Nice jeep. Pirate wont be nice to ur price tho.

U gettin burned out? or what?

jwend · 07-31-2011, 05:40 PM

i would trade for that for sure.. and fawk pirate biggest bunch of know it all web wheeler i hate that site! not saying no one on there wheels but most of them are turds..

just burned out on it.. want something different for a while

hahaa i will never pull a Bill ( sorry bill) Gorgeous where are those programs? lost all of mine in a cpu crash the other day

yellowjacket · 07-31-2011, 06:07 PM

So you gonna post progress pics soon?

jwend · 07-31-2011, 07:09 PM

Quote:

Originally Posted by yellowjacket

So you gonna post progress pics soon?

I will at some point been to busy with the move from the shop and work..

George · 07-31-2011, 10:58 PM

I will get them to this week was not sure if you still needed them after the fallout

yellowjacket · 08-08-2011, 04:19 PM

So hows that 98% antisquat workin out? Is rear walkin under your rig when ur climbin? Or do u notice?

jwend · 08-08-2011, 04:43 PM

it works fine.. i don't feel or notice it wanting to at all... although i dont do hill shoots etc so it doesn't exactly have time... at normal speeds and crawling it tucks tail just like anything else... I have heard mixed emotions about 4 link calculators and off road... most i have heard is they are more geared towards the street side of things thus do not always equate out to being what is right off road... but that's just been threw some general conversation i have had with some folks..

jwend · 08-08-2011, 04:49 PM

its almost done... just have to reinstall the trans t case and shafts..

It is for sure that it is for sale! 27000.00 OBO and comes with a new car hauler

I am motivated to get it gone so make offer, looks like my move may be way sooner than i thought!

Trigger · 08-08-2011, 05:06 PM

What exactly is pulling a Bill? Trading a crawler for a streetable Jeep and then wanting another crawler? I see how you guys are.

jwend · 08-08-2011, 05:12 PM

Quote:

Originally Posted by jwend

its almost done... just have to reinstall the trans t case and shafts..

It is for sure that it is for sale! 27000.00 OBO and comes with a new car hauler

I am motivated to get it gone so make offer, looks like my move may be way sooner than i thought!

I will also trade for a 2 seater v8 buggy/ rig somthing a little smaller on 40's.... (teach) ??

jwend · 12-03-2011, 11:33 AM

I have got alot done to this recently, need to get all the pics together it is almost ready to wheel.. have to get the custom exhaust done and high angle drive shafts ordered.. going to use my old tom woods shafts as back ups.. got a few things i am going to change on it hope to have it out a few times this winter with its first fun run at southern shine this spring..

carwash · 12-03-2011, 12:16 PM

Looking good man... real good.

yellowjacket · 12-03-2011, 12:45 PM

wiring looks real clean.

Sent from my LS670 using Tapatalk

carwash · 12-03-2011, 04:10 PM

It takes crazy time to wires stuff like that... that's why i buy my panels pre made... i have appreciation for that kind of patience.

Redriverranger · 12-03-2011, 04:18 PM

Holy **** batman, that's a lot of switches. Turn the key and start the engine, turn the lights on, turn the wipers on, turn the heater on. The rest is overkill unless this is some kind of James Bond super spy mobile, with lot's of trick gadgets to keep everyone from making the same lines you make.... Looks good though..

humpy · 12-03-2011, 06:00 PM

Nice work dude

jwend · 12-03-2011, 07:08 PM

Quote:

Originally Posted by Redriverranger

Holy **** batman, that's a lot of switches. Turn the key and start the engine, turn the lights on, turn the wipers on, turn the heater on. The rest is overkill unless this is some kind of James Bond super spy mobile, with lot's of trick gadgets to keep everyone from making the same lines you make.... Looks good though..

Yeah it is alot, i like to be able to control everything on its own, switches are for radio, each set of rock lights and what ever else i may want to add but yes i think i have only wired to 6 or 8 of the 12 and have no clue what i will use the others for i also double switched a few things.. back up learn that one from a good buddy, switch crapped out on us on the nasty side of grape vine hit the back up and we went on our way.. i am excessive

jwend · 12-05-2011, 06:32 PM

Yes the switch panel is my work.. i can do them for anyone interested at a small fee

..... Worked on this some more yesterday, got my skid plate started and changed my x member a little wanted to protect the transfer case a little more and give it some more support from rotating.. also got my bump stop mounts fabed up.. will post some pics of progress in a few days coming along nice.. going to be wednesday before i can work on it again.. want to have it done to play in the snow a little bit.

07-04-2011, 12:28 AM	#76
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	1 more Attached Thumbnails __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

07-04-2011, 09:00 AM	#77
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Looks nice. I forgot u only had assist before. Ur gonna be lovin that full hydo. Hey where does the buckminster name come from? __________________ my next rig will be on the trail before zuk 2.0 will

07-04-2011, 11:12 AM	#78
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	he is the little weasle on ice age 2.. my girls little boy named it.. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

07-06-2011, 08:23 PM	#79
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	The final parts order has been placed!! shipped today here friday.... GOAL is trailer it home sunday night! __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

07-11-2011, 10:23 PM	#80
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	your going to want a sway bar with those shocks on the front. looks good. can't wait to see this thing in person eventually. __________________ zuk buggy.....it'll be a jeep eventually.

07-31-2011, 03:42 PM	#81
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	this thig is going to be for sale or for trade when it is finished.. and that will be soon.. just a heads up I will trade for money a RZR or streetable jeep.. but it will take a little of all three or alot of one... going to be asking 27,000 for it.. i am very negotiable and it will come with a brand new car trailer... If you think i am asking too much i really dont want to hear yer opinion either.. i know what mine is and what is out there.. 90% of it is $hit, mine is right. It is built, Dana 60 front with spartan locker yukon cromos and Rpm slugs high steer arms with btf truss and full hydro with derail fan cooled cooler, linked with 8 1 1/4 hiems 2inch upper and lowers all set up by ruff stuff tabs and brackets 16 in fox airs 4.10 14 bolt rear with btf truss Overson mini spool, ruff stuff caliper brackets and 85 chev calipersLinked with all Johnny joints. 2 1/2 lowers 2 inch uppers to Gen right 4 link frame mount. 18 in fox airs 4.10 Tom Woods custom shafts np205 transfer th400 with a art car winters gate shifter with derail fan cooled cooler 05 70k mile chevy 5.3 with new jegs radiator shroud and fan corvette master cylinder brake set up CW built front bumper stinger and winch mount Rear half of frame cut off and custom frame and bumper installed Full roll cage tied to frame with seats tied to cage 3 prp high back comp seats and a preme seat for a kid, all with 5 point harnesses It will come with a cb radio and wake board speakers the dash has all auto meter gauges oil pressure water temp, fuel level, volts and fuel pressure. 12 fused switches. The list on this thing goes on and on and on.. there was no cost spared in building this thing all high end parts and done right I love this thing and it pains me to sell it but I have things that are more important to take care of at this point. This is the only post for now but when its finished it will be posted on pirate and everywhere else.. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

07-31-2011, 05:07 PM	#82
George Join Date: Jan 2011 Posts: 21	your not going to to Bill are you lol

07-31-2011, 05:16 PM	#83
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Id offer my buggy and $20k but sounds like ur gettin out of the sport:confused:. Nice jeep. Pirate wont be nice to ur price tho. U gettin burned out? or what? __________________ my next rig will be on the trail before zuk 2.0 will

07-31-2011, 05:40 PM	#84
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	i would trade for that for sure.. and fawk pirate biggest bunch of know it all web wheeler i hate that site! not saying no one on there wheels but most of them are turds.. just burned out on it.. want something different for a while hahaa i will never pull a Bill ( sorry bill) Gorgeous where are those programs? lost all of mine in a cpu crash the other day __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

07-31-2011, 06:07 PM	#85
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	So you gonna post progress pics soon? __________________ my next rig will be on the trail before zuk 2.0 will

07-31-2011, 10:58 PM	#87
George Join Date: Jan 2011 Posts: 21	I will get them to this week was not sure if you still needed them after the fallout

08-08-2011, 04:19 PM	#88
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	So hows that 98% antisquat workin out? Is rear walkin under your rig when ur climbin? Or do u notice? __________________ my next rig will be on the trail before zuk 2.0 will

08-08-2011, 04:43 PM	#89
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	it works fine.. i don't feel or notice it wanting to at all... although i dont do hill shoots etc so it doesn't exactly have time... at normal speeds and crawling it tucks tail just like anything else... I have heard mixed emotions about 4 link calculators and off road... most i have heard is they are more geared towards the street side of things thus do not always equate out to being what is right off road... but that's just been threw some general conversation i have had with some folks.. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

08-08-2011, 04:49 PM	#90
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	its almost done... just have to reinstall the trans t case and shafts.. It is for sure that it is for sale! 27000.00 OBO and comes with a new car hauler I am motivated to get it gone so make offer, looks like my move may be way sooner than i thought! __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

08-08-2011, 05:06 PM	#91
Trigger Join Date: Mar 2007 Location: Xenia, OH Posts: 281	What exactly is pulling a Bill? Trading a crawler for a streetable Jeep and then wanting another crawler? I see how you guys are.

12-03-2011, 11:33 AM	#93
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	I have got alot done to this recently, need to get all the pics together it is almost ready to wheel.. have to get the custom exhaust done and high angle drive shafts ordered.. going to use my old tom woods shafts as back ups.. got a few things i am going to change on it hope to have it out a few times this winter with its first fun run at southern shine this spring.. Attached Thumbnails __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

12-03-2011, 12:16 PM	#94
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Looking good man... real good. __________________

12-03-2011, 12:45 PM	#95
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	wiring looks real clean. Sent from my LS670 using Tapatalk __________________ my next rig will be on the trail before zuk 2.0 will

12-03-2011, 04:10 PM	#96
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	It takes crazy time to wires stuff like that... that's why i buy my panels pre made... i have appreciation for that kind of patience. __________________

12-03-2011, 04:18 PM	#97
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	Holy **** batman, that's a lot of switches. Turn the key and start the engine, turn the lights on, turn the wipers on, turn the heater on. The rest is overkill unless this is some kind of James Bond super spy mobile, with lot's of trick gadgets to keep everyone from making the same lines you make.... Looks good though.. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

12-03-2011, 06:00 PM	#98
humpy Join Date: Sep 2008 Posts: 573	Nice work dude __________________ S10 with a few air shocks..

12-05-2011, 06:32 PM	#100
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Yes the switch panel is my work.. i can do them for anyone interested at a small fee ..... Worked on this some more yesterday, got my skid plate started and changed my x member a little wanted to protect the transfer case a little more and give it some more support from rotating.. also got my bump stop mounts fabed up.. will post some pics of progress in a few days coming along nice.. going to be wednesday before i can work on it again.. want to have it done to play in the snow a little bit. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad: