went wheeling today.....

carwash · 02-12-2008, 09:07 PM

Quote:

Originally Posted by tjjeepjeep

I personally find my TJ runs better dirty. Mine wouldn't know what to do if it was wheeled and washed in the same day. If nothing else, turn the radio up. I recommend 94.9 The Sound.

94.9 is the suck now... "it's different here"... whatever.

yeah, they play different stuff than everyone else, but they still only have a playlist of about 60 songs that they recycle...

The new 96 Rock is cool lately, but on Sirius, i'm all about Left Of Center, Backspin, Buzzsaw, Octane, etc... i'd die without my sirius.

mikeyours · 02-12-2008, 09:20 PM

Sirus all the way!!! anywho...well that was the problem but i noticed something when I had the wheel off. This is my first jeep and im still learning, the studs were moving back and forth when I applyed pressure about a 1/16 of an inch. the axle shaft nut was moving to. is this normal or are my shafts pulling out? The 4wheel drive was working fine today. Is there something I can get to help me with understanding my axels and how to work on them?

hardluck · 02-12-2008, 09:23 PM

might be the unit bearing the axle runs through, i dont think it should have any play in it like that but im not sure

mikeyours · 02-12-2008, 09:38 PM

anyone else know whats going on???

94Dodge Truggy · 02-12-2008, 09:46 PM

How new is this jeep and what has it been through as far as wheeling?

tinbeater · 02-12-2008, 09:46 PM

Would like to help out but!
It must be a jeep thing, I dont understand.

mikeyours · 02-12-2008, 09:50 PM

Just light wheeling slight hills and mud holes. its an 06, I dont know if i made it sound confusing or not but its just the studs for my wheel they move back and forth like a 1/16

94Dodge Truggy · 02-12-2008, 10:07 PM

tighten the lug nuts? If the wheel bearings are smoked and it is an 06 you must be harder than what the 30 front can stand.

02-12-2008, 09:20 PM	#2
mikeyours Join Date: Sep 2007 Location: Hamilton Ohio, USA Posts: 42	Sirus all the way!!! anywho...well that was the problem but i noticed something when I had the wheel off. This is my first jeep and im still learning, the studs were moving back and forth when I applyed pressure about a 1/16 of an inch. the axle shaft nut was moving to. is this normal or are my shafts pulling out? The 4wheel drive was working fine today. Is there something I can get to help me with understanding my axels and how to work on them? __________________ 06 TJ Inline 6, 6Speed 4in Rough Country Coil Lift, 33x12.5 SS Thornbirds, 15x10 Crager Soft 8s

02-12-2008, 09:23 PM	#3
hardluck Poor Bastard Join Date: Jan 2007 Location: Lynchburg, OH Posts: 189	might be the unit bearing the axle runs through, i dont think it should have any play in it like that but im not sure __________________ if you can't fit it....FORCE IT!!!!!!!!!

02-12-2008, 09:38 PM	#4
mikeyours Join Date: Sep 2007 Location: Hamilton Ohio, USA Posts: 42	anyone else know whats going on??? __________________ 06 TJ Inline 6, 6Speed 4in Rough Country Coil Lift, 33x12.5 SS Thornbirds, 15x10 Crager Soft 8s

02-12-2008, 09:50 PM	#7
mikeyours Join Date: Sep 2007 Location: Hamilton Ohio, USA Posts: 42	Just light wheeling slight hills and mud holes. its an 06, I dont know if i made it sound confusing or not but its just the studs for my wheel they move back and forth like a 1/16 __________________ 06 TJ Inline 6, 6Speed 4in Rough Country Coil Lift, 33x12.5 SS Thornbirds, 15x10 Crager Soft 8s

02-12-2008, 09:46 PM	#5
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	How new is this jeep and what has it been through as far as wheeling?

02-12-2008, 09:46 PM	#6
tinbeater Join Date: Feb 2007 Location: New Richmond Ohio Posts: 266	Would like to help out but! It must be a jeep thing, I dont understand.

02-12-2008, 10:07 PM	#8
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	tighten the lug nuts? If the wheel bearings are smoked and it is an 06 you must be harder than what the 30 front can stand.