nitrogen?

dropitlow88 · 06-02-2014, 12:02 PM

looking for a 20 cu ft tank. any suggestions out there on price, etc? located in northern ky. local welding shop i normally deal with doesnt do 20 cu ft tanks. could probably do a 40 too, just want to be able to carry it with me so i can tune at the trail.

elmer91 · 06-02-2014, 07:09 PM

R&M welding in wilder wants $160 (if I remember right) for a 40. that is brand new, filled to 1400psi. I was looking a while ago for some and this is the only place i got a quote from. You might be able to find something cheaper somewhere, not sure where else to look.

dropitlow88 · 06-02-2014, 09:06 PM

i called them because that is who i normally deal with. they wanted $335 for regulator and tank and he told me they could only do a 80 cu ft tank? maybe i should talk to someone else there.

elmer91 · 06-05-2014, 08:57 PM

I stopped by there sometime late last year to ask them about it. That was for a tank only, no regulator, since we bought one online already.

dropitlow88 · 06-06-2014, 12:22 PM

picked up a full 20 cu ft tank from wright bros for $84 and found a 0-400 psi nitrogen reg for $52 shipped on Amazon. Already had a hose and bought the no loss chuck on ebay for $40. Less than $200 for the whole setup. Not disappointed at all.

06-02-2014, 12:02 PM	#1
dropitlow88 Join Date: Jul 2013 Posts: 30	nitrogen? looking for a 20 cu ft tank. any suggestions out there on price, etc? located in northern ky. local welding shop i normally deal with doesnt do 20 cu ft tanks. could probably do a 40 too, just want to be able to carry it with me so i can tune at the trail.

06-02-2014, 07:09 PM	#2
elmer91 Join Date: Feb 2011 Location: Independence, KY Posts: 40	R&M welding in wilder wants $160 (if I remember right) for a 40. that is brand new, filled to 1400psi. I was looking a while ago for some and this is the only place i got a quote from. You might be able to find something cheaper somewhere, not sure where else to look. __________________ Project ZJ (Zombie Jeep)- 1995 Jeep ZJ undergoing axle swap, 4-link, and becoming a firewall buggy.

06-05-2014, 08:57 PM	#4
elmer91 Join Date: Feb 2011 Location: Independence, KY Posts: 40	I stopped by there sometime late last year to ask them about it. That was for a tank only, no regulator, since we bought one online already. __________________ Project ZJ (Zombie Jeep)- 1995 Jeep ZJ undergoing axle swap, 4-link, and becoming a firewall buggy.

06-02-2014, 09:06 PM	#3
dropitlow88 Join Date: Jul 2013 Posts: 30	i called them because that is who i normally deal with. they wanted $335 for regulator and tank and he told me they could only do a 80 cu ft tank? maybe i should talk to someone else there.

06-06-2014, 12:22 PM	#5
dropitlow88 Join Date: Jul 2013 Posts: 30	picked up a full 20 cu ft tank from wright bros for $84 and found a 0-400 psi nitrogen reg for $52 shipped on Amazon. Already had a hose and bought the no loss chuck on ebay for $40. Less than $200 for the whole setup. Not disappointed at all.