Before & After - My 1993 K1500 - Page 4

93 Krawler · 05-08-2014, 09:07 PM

Quote:

Originally Posted by Redriverranger

After you drop off the ledge, that first pass by the outcropping on the left and the tree is getting real narrow. I wouldn't worry about putting any fresh paint on before this run. The earth appears to be moving...

Great, I had a hell of a time getting past it last year...

underpowered · 05-08-2014, 10:03 PM

Lions Den is one i want to give a shot in the ol' k5.

93 Krawler · 05-12-2014, 01:51 PM

Finally... I'll have traction!!!

Click image for larger version

Name: WP_001653.jpg
Views: 93
Size: 56.3 KB
ID: 7541

Runoveru2 · 05-12-2014, 02:27 PM

Now that you have traction... you gonna hit little Jagger with me?

93 Krawler · 05-12-2014, 04:24 PM

Quote:

Originally Posted by Runoveru2

Now that you have traction... you gonna hit little Jagger with me?

I have the nuts to follow your ruts.

But not till the last day.

94Dodge Truggy · 05-13-2014, 09:16 AM

Quote:

Originally Posted by Runoveru2

Now that you have traction... you gonna hit little Jagger with me?

Little Jagger was a fun climb! Almost made it up but kept slipping on my own tranny fluid.

bbtank45 · 05-13-2014, 10:54 AM

i have a feeling this is going to be an epic Harlan trip!.....Kevin, after riding in your corbeaus @ Windrock for a little bit, i purchased a set and installed them this past weekend. Great advice!

93 Krawler · 05-13-2014, 05:36 PM

Quote:

Originally Posted by bbtank45

i have a feeling this is going to be an epic Harlan trip!.....Kevin, after riding in your corbeaus @ Windrock for a little bit, i purchased a set and installed them this past weekend. Great advice!

You won't regret buying suspension seats. Your back will thank you.

93 Krawler · 04-15-2015, 08:27 PM

After much debate about propane or a new motor, I chose motor. After the trip to Rush this past weekend, I was done with the POS stock engine. So I bought this 04 Avalanche Z71 with a 5.3 for $1400. Should be ready for Harlan in May.

Click image for larger version

Name: WP_20150415_19_55_38_Pro.jpg
Views: 92
Size: 65.2 KB
ID: 8135

Click image for larger version

Name: WP_20150415_19_55_52_Pro.jpg
Views: 97
Size: 62.1 KB
ID: 8136

Click image for larger version

Name: WP_20150415_19_56_00_Pro.jpg
Views: 100
Size: 70.4 KB
ID: 8137

underpowered · 04-19-2015, 05:17 PM

LS is the way to go. the power increase and reliability is awesome. If the stock TBI in mine ever gives up, this is the route i plan.

93 Krawler · 04-23-2015, 09:18 PM

Got the engine and trans out. Now the fun part, separating the harness.

Click image for larger version

Name: WP_20150423_20_49_58_Pro.jpg
Views: 87
Size: 89.4 KB
ID: 8143

I ended up with an extra 5.3 out of the deal. It is a drive by cable. The one from the Avalanche is drive by wire. Not sure which one I want yet.

Click image for larger version

Name: WP_20150421_19_42_33_Pro.jpg
Views: 85
Size: 79.7 KB
ID: 8144

93 Krawler · 04-27-2015, 08:23 PM

I have most of the extra crap removed from the harness. Man that's a lot of wires...

Click image for larger version

Name: WP_20150426_14_54_08_Pro.jpg
Views: 89
Size: 129.0 KB
ID: 8147

Click image for larger version

Name: WP_20150426_14_55_14_Pro.jpg
Views: 75
Size: 131.7 KB
ID: 8148

beer_goggles_009 · 04-27-2015, 09:30 PM

That's allot of spaghetti. Harlan in only a month away !

WrenchMonkey · 04-28-2015, 09:05 PM

Quote:

Originally Posted by 93 Krawler

It looks a lot worse than it really is.

Good, cause it looks pretty bad!

93 Krawler · 04-28-2015, 09:19 PM

Quote:

Originally Posted by WrenchMonkey

Good, cause it looks pretty bad!

It already looks better. Most of that extra wire is gone. The hard part will be getting the computer to the passenger side inside the cab. The PCM was originally right next to the drivers wheel well. It will be in good shape by the end of tomorrow.

Ky Mudhunter · 04-29-2015, 12:23 PM

Kudos, on building your own harness from stock! I made mine for the LT1 swap and had to do the same thing with moving the computer from the driver's front to the passenger rear of the engine compartment. By building my own I learned so much more about how the fuel injection system actually worked.

93 Krawler · 04-29-2015, 06:34 PM

Quote:

Originally Posted by Ky Mudhunter

By building my own I learned so much more about how the fuel injection system actually worked.

Exactly, which also helps tracing problems down in the future.

93 Krawler · 05-05-2015, 10:02 PM

Got the harness done. This is much better.

Click image for larger version

Name: WP_20150505_20_06_03_Pro.jpg
Views: 69
Size: 91.8 KB
ID: 8155

Click image for larger version

Name: WP_20150505_20_06_17_Pro.jpg
Views: 76
Size: 102.8 KB
ID: 8156

Let the fun begin...

Click image for larger version

Name: WP_20150505_20_39_27_Pro.jpg
Views: 80
Size: 62.4 KB
ID: 8157

93 Krawler · 05-07-2015, 09:21 PM

Dropped the PCM off to a guy in White Oak that will remove all the BS I don't need for $90.. http://lt1pcmtuning.com/ We'll see how he does.

Ordered the fuse block for the engine today. Should work out good. http://www.waytekwire.com/item/46345...RO-RELAY-RTMR/

There is no way I will have this ready for memorial day at Harlan.

Looks like I'm RZR bound.

93 Krawler · 05-14-2015, 03:22 PM

After several hours of running the engine, there was a small amount of steam coming out of the exhaust. To be safe, I tore the engine down to replace the head gaskets and also check for cracks. Bought some spot check from magnaflux to see if there are any cracks. Going to lap the valves in if all is good.

Click image for larger version

Name: WP_20150514_07_57_02_Pro[1].jpg
Views: 67
Size: 83.2 KB
ID: 8158

Click image for larger version

Name: WP_20150513_13_34_36_Pro[1].jpg
Views: 77
Size: 87.6 KB
ID: 8159

underpowered · 05-14-2015, 08:17 PM

04 was during the years GM used Castech heads, which are known for hairline cracks in them.

93 Krawler · 05-15-2015, 09:42 PM

Mine look like this. Hopefully this is a good thing.

Click image for larger version

Name: WP_20150515_18_22_16_Pro.jpg
Views: 86
Size: 94.0 KB
ID: 8165

Got my clamp on VSS ring. Looks like I have everything I need to get this done. Time to get busy.

Click image for larger version

Name: WP_20150515_20_54_10_Pro.jpg
Views: 75
Size: 71.2 KB
ID: 8166

93 Krawler · 05-26-2015, 12:45 PM

I checked the heads for cracks and didn't see any. I did this as a preliminary check in hopes of seeing something obvious. Since I didn't, off they go to the machine shop to be cleaned, pressure tested, and checked for flatness. I'm taking them tomorrow to Performance Engineering in Hamilton. I've heard good things about them. https://www.facebook.com/PerformanceEngineeringLLC

93 Krawler · 06-02-2015, 11:16 AM

Got the heads back. They said no cracks, but needed to be milled.
Lapped the valves in myself.

Click image for larger version

Name: WP_20150530_13_47_18_Pro.jpg
Views: 75
Size: 55.5 KB
ID: 8215

Click image for larger version

Name: WP_20150530_13_54_51_Pro.jpg
Views: 82
Size: 70.7 KB
ID: 8216

Click image for larger version

Name: WP_20150530_14_52_21_Pro.jpg
Views: 78
Size: 69.4 KB
ID: 8217

93 Krawler · 06-02-2015, 11:24 AM

Got the the engine, trans, and t-case out. Time to put it back together.

05-08-2014, 10:03 PM	#77
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	Lions Den is one i want to give a shot in the ol' k5. __________________ beat up rusted out k5

05-12-2014, 02:27 PM	#79
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	Now that you have traction... you gonna hit little Jagger with me? __________________ No need for a Winch...You just have to make it !!

05-13-2014, 10:54 AM	#82
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	i have a feeling this is going to be an epic Harlan trip!.....Kevin, after riding in your corbeaus @ Windrock for a little bit, i purchased a set and installed them this past weekend. Great advice! __________________ 1985 4runner "Redneck Gigalo"

04-19-2015, 05:17 PM	#85
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	LS is the way to go. the power increase and reliability is awesome. If the stock TBI in mine ever gives up, this is the route i plan. __________________ beat up rusted out k5

04-23-2015, 09:18 PM	#86
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Got the engine and trans out. Now the fun part, separating the harness. I ended up with an extra 5.3 out of the deal. It is a drive by cable. The one from the Avalanche is drive by wire. Not sure which one I want yet.

05-12-2014, 01:51 PM	#78
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Finally... I'll have traction!!!

04-15-2015, 08:27 PM	#84
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	After much debate about propane or a new motor, I chose motor. After the trip to Rush this past weekend, I was done with the POS stock engine. So I bought this 04 Avalanche Z71 with a 5.3 for $1400. Should be ready for Harlan in May.

04-27-2015, 08:23 PM	#87
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	I have most of the extra crap removed from the harness. Man that's a lot of wires...

04-27-2015, 09:30 PM	#88
beer_goggles_009 - CORE Member - Join Date: Apr 2011 Location: Mt Washington Posts: 188	That's allot of spaghetti. Harlan in only a month away !

04-29-2015, 12:23 PM	#91
Ky Mudhunter Join Date: May 2013 Posts: 75	Kudos, on building your own harness from stock! I made mine for the LT1 swap and had to do the same thing with moving the computer from the driver's front to the passenger rear of the engine compartment. By building my own I learned so much more about how the fuel injection system actually worked.

05-05-2015, 10:02 PM	#93
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Got the harness done. This is much better. Let the fun begin...

05-07-2015, 09:21 PM	#94
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Dropped the PCM off to a guy in White Oak that will remove all the BS I don't need for $90.. http://lt1pcmtuning.com/ We'll see how he does. Ordered the fuse block for the engine today. Should work out good. http://www.waytekwire.com/item/46345...RO-RELAY-RTMR/ There is no way I will have this ready for memorial day at Harlan. Looks like I'm RZR bound.

05-14-2015, 03:22 PM	#95
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	After several hours of running the engine, there was a small amount of steam coming out of the exhaust. To be safe, I tore the engine down to replace the head gaskets and also check for cracks. Bought some spot check from magnaflux to see if there are any cracks. Going to lap the valves in if all is good.

05-14-2015, 08:17 PM	#96
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	04 was during the years GM used Castech heads, which are known for hairline cracks in them. __________________ beat up rusted out k5

05-15-2015, 09:42 PM	#97
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Mine look like this. Hopefully this is a good thing. Got my clamp on VSS ring. Looks like I have everything I need to get this done. Time to get busy.

05-26-2015, 12:45 PM	#98
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	I checked the heads for cracks and didn't see any. I did this as a preliminary check in hopes of seeing something obvious. Since I didn't, off they go to the machine shop to be cleaned, pressure tested, and checked for flatness. I'm taking them tomorrow to Performance Engineering in Hamilton. I've heard good things about them. https://www.facebook.com/PerformanceEngineeringLLC

06-02-2015, 11:16 AM	#99
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Got the heads back. They said no cracks, but needed to be milled. Lapped the valves in myself.

06-02-2015, 11:24 AM	#100
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Got the the engine, trans, and t-case out. Time to put it back together.