Before & After - My 1993 K1500 - Page 3

underpowered · 03-07-2014, 08:56 PM

aetna cut TSL = Almost as good as a bogger IMO in the mud.

Flint · 03-07-2014, 10:40 PM

The Aetna cut looks as if it would be a good compromise cut for TSL's. I'm not convinced it would be as good as a bogger but it might give better bite, better cleaning for a TSL. I think I'll research it for possible use on my TSL's on front/ boggers on back.

93 Krawler · 03-08-2014, 10:00 AM

Quote:

Originally Posted by underpowered

aetna cut TSL = Almost as good as a bogger IMO in the mud.

I've seen this many times, but I'd have a hard time paying $450 for a tire and cutting half the tread off.

Flint · 03-08-2014, 01:37 PM

The concept of cutting tread off a 450 dollar tire doesn't bother me IF it actually improves performance. I've been spending money on the jeep to improve it since I bought the jeep.

The change looks like it might improve thrust, help cleaning and not impact directional control for steering. Unfortunately I don't know that to be true and haven't read many reports as of now. I also worry that cutting the tire to that extent would accelerate wear or cause premature failure.

It's something to think about...

humpy · 03-08-2014, 03:10 PM

The 44 blem bogger rear and 43 Sx front

Themselves match the 43 with half inch.... I like the fat boggers myself

humpy · 03-08-2014, 03:11 PM

If u wanna better pics I can take some when it comes back from exhaust shop

93 Krawler · 03-08-2014, 07:43 PM

The 44 looks good that wide. Looks proportional. Are the rims 17 x 12?
Muffler shop... Does that mean it's almost ready to wheel?

The 39.5 x 15 TSL Bogger combo will run me $2050 shipped. A set of 43 x 17 SX will run me $2350 shipped. If I can get enough from my tires and rims to cover new rims, I would do it. Anyone have some 17x10 rims with beadlocks they want to sell or trade?

humpy · 03-08-2014, 09:13 PM

Quote:

Originally Posted by 93 Krawler

The 44 looks good that wide. Looks proportional. Are the rims 17 x 12?
Muffler shop... Does that mean it's almost ready to wheel?

The 39.5 x 15 TSL Bogger combo will run me $2050 shipped. A set of 43 x 17 SX will run me $2350 shipped. If I can get enough from my tires and rims to cover new rims, I would do it. Anyone have some 17x10 rims with beadlocks they want to sell or trade?

16.5 h1s... It aint far off from bein done just don't have time to finish been workin ton of hours .... That great American dream of small business ownership

underpowered · 03-08-2014, 09:24 PM

Quote:

Originally Posted by 93 Krawler

I've seen this many times, but I'd have a hard time paying $450 for a tire and cutting half the tread off.

i can understand that. i believe i would have that same issue if i ever bought new tires.

humpy · 03-08-2014, 10:05 PM

Quote:

Originally Posted by underpowered

i can understand that. i believe i would have that same issue if i ever bought new tires.

It's only $$ lol if I had 2 more blem boggers I these woukd already b cut but they wear out so much faster and with not bein able to buy em I kinda want em to last... Hoping they start makin 47 Ltb again

mckeddie · 03-09-2014, 08:01 PM

Didn't you have a set once?

humpy · 03-10-2014, 02:46 PM

Quote:

Originally Posted by mckeddie

Didn't you have a set once?

Yes but I don't wanna run a tire I can't replace... If I cut one o these boggers I'll put 43 Sx back ok rear

dropitlow88 · 03-10-2014, 06:21 PM

looking good humpy, thanks for the tank!

kkoepper · 03-10-2014, 06:41 PM

Took the buggy to Redbird State Riding area (southern IN) on Sunday. Pretty sloppy, but not as bad as I thought it might be. The trails are pretty tight there and the buggy is pretty wide, so I was frequently having to pivot off trees. The Pitbull Rockers did great. No damage to the sidewalls and they cleaned out very well. I had read that they don't do well in mud, but that wasn't the case for me. Spin em and they stayed clean and got excellent traction. Happy with em so far.

93 Krawler · 03-23-2014, 12:59 PM

I decided to stay with 39.5's, so I'm doing TSL's in the front, and Boggers in the back.

I'm also going to put on the Edelbrock multi-port injection setup I've had sitting around. It's a TBI to MPI kit. Also going to put in a new performer cam that matches the EFI setup. That should wake it up a little.

Nuts · 03-24-2014, 10:05 PM

Quote:

Originally Posted by humpy

The 44 blem bogger rear and 43 Sx front

Themselves match the 43 with half inch.... I like the fat boggers myself

44x18x16.5? That's what I got but yours look skinnier???

humpy · 03-25-2014, 06:40 AM

Quote:

Originally Posted by Nuts

44x18x16.5? That's what I got but yours look skinnier???

Story I my life lol

93 Krawler · 05-07-2014, 09:03 PM

Got my tires today.

Click image for larger version

Name: WP_001645.jpg
Views: 4369
Size: 47.5 KB
ID: 7526

Get my new rock rings tomorrow. These things are done...

Click image for larger version

Name: WP_001648.jpg
Views: 4407
Size: 30.9 KB
ID: 7527

Got my multi-port injection and cam in.

Click image for larger version

Name: WP_001636.jpg
Views: 4452
Size: 66.9 KB
ID: 7528

Should have my tires back on my rig tomorrow night.

Click image for larger version

Name: WP_001646.jpg
Views: 4439
Size: 37.6 KB
ID: 7529

WrenchMonkey · 05-07-2014, 09:07 PM

Daaaaaaaammnnn...

timido · 05-07-2014, 10:35 PM

Been busy

Runoveru2 · 05-07-2014, 11:40 PM

I'm ready to see it in action at Harlan in a couple weeks. .. it just can't get here quick enough.

93 Krawler · 05-08-2014, 10:09 AM

Quote:

Originally Posted by Runoveru2

I'm ready to see it in action at Harlan in a couple weeks. .. it just can't get here quick enough.

I know, I'm ready for some Harlan wheeling.

Also plated, gusseted, and welded my spring hangers on so I don't tear one off like I did in Lions den last year.

The hanger after Lions den and a trail fix so I could keep going.

Click image for larger version

Name: WP_001629.jpg
Views: 4518
Size: 24.2 KB
ID: 7530

The back is plated and has gussets to the frame.

Click image for larger version

Name: WP_001638.jpg
Views: 4436
Size: 59.2 KB
ID: 7531

Click image for larger version

Name: WP_001637.jpg
Views: 4412
Size: 47.6 KB
ID: 7532

I'm ready for Lions den again.

bbtank45 · 05-08-2014, 01:37 PM

Kevin, lookin awesome buddy!....I dont mind my boggers at all, other than i wish they were a little bigger. Youre going to love that setup.....Did u get them from GoForth?

Im going to try Lions Den this year for the first time

93 Krawler · 05-08-2014, 02:00 PM

Got them from national tire and wheel.

Sent from my Radar 4G using Board Express

Redriverranger · 05-08-2014, 08:06 PM

After you drop off the ledge, that first pass by the outcropping on the left and the tree is getting real narrow. I wouldn't worry about putting any fresh paint on before this run. The earth appears to be moving...

03-07-2014, 08:56 PM	#51
underpowered They call me......Scuba Join Date: Sep 2010 Location: Burlington, KY Posts: 292	aetna cut TSL = Almost as good as a bogger IMO in the mud. __________________ beat up rusted out k5

03-07-2014, 10:40 PM	#52
Flint Join Date: Jan 2014 Posts: 86	The Aetna cut looks as if it would be a good compromise cut for TSL's. I'm not convinced it would be as good as a bogger but it might give better bite, better cleaning for a TSL. I think I'll research it for possible use on my TSL's on front/ boggers on back. __________________ Facta, non Verba. 2001 Wrangler 2000 Wrangler TJ 1967 CJ5A 2004 Tow rig

03-08-2014, 01:37 PM	#54
Flint Join Date: Jan 2014 Posts: 86	The concept of cutting tread off a 450 dollar tire doesn't bother me IF it actually improves performance. I've been spending money on the jeep to improve it since I bought the jeep. The change looks like it might improve thrust, help cleaning and not impact directional control for steering. Unfortunately I don't know that to be true and haven't read many reports as of now. I also worry that cutting the tire to that extent would accelerate wear or cause premature failure. It's something to think about... __________________ Facta, non Verba. 2001 Wrangler 2000 Wrangler TJ 1967 CJ5A 2004 Tow rig

03-08-2014, 03:10 PM	#55
humpy Join Date: Sep 2008 Posts: 573	The 44 blem bogger rear and 43 Sx front Themselves match the 43 with half inch.... I like the fat boggers myself __________________ S10 with a few air shocks..

03-08-2014, 03:11 PM	#56
humpy Join Date: Sep 2008 Posts: 573	If u wanna better pics I can take some when it comes back from exhaust shop __________________ S10 with a few air shocks..

03-08-2014, 07:43 PM	#57
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	The 44 looks good that wide. Looks proportional. Are the rims 17 x 12? Muffler shop... Does that mean it's almost ready to wheel? The 39.5 x 15 TSL Bogger combo will run me $2050 shipped. A set of 43 x 17 SX will run me $2350 shipped. If I can get enough from my tires and rims to cover new rims, I would do it. Anyone have some 17x10 rims with beadlocks they want to sell or trade?

03-09-2014, 08:01 PM	#61
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	Didn't you have a set once? __________________ zuk buggy.....it'll be a jeep eventually.

03-10-2014, 06:21 PM	#63
dropitlow88 Join Date: Jul 2013 Posts: 30	looking good humpy, thanks for the tank!

03-10-2014, 06:41 PM	#64
kkoepper Join Date: May 2011 Location: Franklin, IN Posts: 47	Took the buggy to Redbird State Riding area (southern IN) on Sunday. Pretty sloppy, but not as bad as I thought it might be. The trails are pretty tight there and the buggy is pretty wide, so I was frequently having to pivot off trees. The Pitbull Rockers did great. No damage to the sidewalls and they cleaned out very well. I had read that they don't do well in mud, but that wasn't the case for me. Spin em and they stayed clean and got excellent traction. Happy with em so far.

03-23-2014, 12:59 PM	#65
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	I decided to stay with 39.5's, so I'm doing TSL's in the front, and Boggers in the back. I'm also going to put on the Edelbrock multi-port injection setup I've had sitting around. It's a TBI to MPI kit. Also going to put in a new performer cam that matches the EFI setup. That should wake it up a little. Attached Thumbnails

05-07-2014, 09:03 PM	#68
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Got my tires today. Get my new rock rings tomorrow. These things are done... Got my multi-port injection and cam in. Should have my tires back on my rig tomorrow night.

05-07-2014, 09:07 PM	#69
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Daaaaaaaammnnn... __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

05-07-2014, 10:35 PM	#70
timido Student Driver Join Date: Oct 2011 Posts: 197	Been busy

05-07-2014, 11:40 PM	#71
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	I'm ready to see it in action at Harlan in a couple weeks. .. it just can't get here quick enough. __________________ No need for a Winch...You just have to make it !!

05-08-2014, 01:37 PM	#73
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Kevin, lookin awesome buddy!....I dont mind my boggers at all, other than i wish they were a little bigger. Youre going to love that setup.....Did u get them from GoForth? Im going to try Lions Den this year for the first time __________________ 1985 4runner "Redneck Gigalo"

05-08-2014, 02:00 PM	#74
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	Got them from national tire and wheel. Sent from my Radar 4G using Board Express

05-08-2014, 08:06 PM	#75
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	After you drop off the ledge, that first pass by the outcropping on the left and the tree is getting real narrow. I wouldn't worry about putting any fresh paint on before this run. The earth appears to be moving... __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character